Europe's cycling industry spent the past year counting mechanics. European Cycling Industries (ECI) released the NextGen Mechanics Report 2026, which says Europe is short 45,000 mechanics today and will need 105,000 more by 2032. Then came a webinar, news coverage and a rebuttal.
If you own a specialty bike shop in North America, none of this is news. You've posted the job and gotten two applicants. You've watched a good tech leave for a warehouse job that paid a few dollars more an hour. You've seen the spring backlog hit two weeks by April.
The report is worth reading, and so are its critics. ECI wants a shared standard for what a competent mechanic should know, plus clearer training paths into the trade. Martin Wilkins of Cycle Tech UK pushed back. He argues mechanics aren't paid fairly for their time, and that unsupported e-bikes leave shops holding the bag. Both sides make fair points.
The report even says the economics of cycle maintenance sit at the heart of the shortage. That's the right place to look. What nobody has laid out yet is what that means inside a service department on a Tuesday morning.
What we already know
Mechanics rarely quit because they stopped loving bikes. They quit a shop.
They quit when nobody told them what a good day looks like. They quit when the pay never moves no matter how hard they work. They quit when the path forward is "keep doing this until you burn out or buy the place." Figures cited in the ECI webinar and BikeRadar's coverage put annual turnover among Dutch mechanics somewhere between a quarter and a third. North American shops don't have a clean number, but most owners could guess theirs to within a person or two.
More applicants won't fix it
Say the recruiting push works. Every training program fills, and every open position gets three strong candidates.
If the service department still loses money, nothing has changed. You've hired more people into the same leak. Pay stays flat because the department can't afford more. The new hire burns out on the same unclear expectations as the last one. In two years, you're posting the same job.
The report itself links the shortage to low pay. A service department that loses money can't fix that. Pay comes from profit, and status comes from a job with standards and a path. Both start with the system.
When a shop can't keep good people even after it finds them, the shortage isn't the problem. It's a sign the system is broken.
The room that said no
A few years ago, I sat with a group of shop owners, and the conversation turned to service, as it usually did. One owner said flatly that service will never be profitable. For his shop, it was a loss leader, the thing that kept bike customers coming back. Others in the room agreed.
It was an uncomfortable conversation. Nobody in that room was a bad operator. Under the frustration were three real problems:
They didn't know what to measure. Without a number, "profitable" is just a feeling.
They didn't know the path. Even owners who wanted to change couldn't see the steps from losing money to making it.
It felt like too much. The POS system, the shop's culture and the way the industry has always run service all seemed to push against the decision. Customers weren't the obstacle.
Over the next couple of years, most of those shops started working on it.
The question
So start with the first problem. Do you know how much your mechanics need to produce for your service department to be profitable? In an hour? A month? A year?
Most of us don't. That isn't because we're bad operators. The industry never treated the service department as a business of its own. It was the thing that kept bike sales happy.
Here's a simple way to see it, using a shop with two full-time mechanics. These are example numbers, so use your own. Your labor rate should come from what your shop needs to be profitable in your region, not from what the shop down the street charges.
What two mechanics produce
2,000 hours each a year, at a $95 labor rate
Not every hour on the clock turns into ticketed work. Some time goes to cleanup, waiting on parts and tasks off the stand. At 75%, that's 1,500 hours each, or 3,000 hours total.
3,000 × $95 = $285,000 a year in labor, or $23,750 a month
What the service department costs to run
Payroll
Mechanic wages: $90,000
Payroll taxes and benefits: $20,000
Service writer's share of time: $20,000
Space
Rent for the service shop and service storage space: $30,000
Shared expenses
Service's share of utilities: $6,000
Service's share of other shared costs (insurance, POS and software, card processing, accounting): $14,000
Shop
Tools and shop supplies: $8,000
Total: $188,000
What's left: $285,000 − $188,000 = $97,000 a year in service profit
If that number looks high, that's the point. Most shops have never run it. The ones that do usually find one of two things. Their mechanics' hours aren't turning into ticketed work, or their services are priced to match the shop down the street instead of the time the work takes and what it's worth to the customer. Often it's both.
Shared costs get split by how much the service department uses them. If service and service storage take up 30% of your square footage, service carries 30% of the rent. Do the same for utilities and the other shared costs. It won't be perfect, but it will be close enough to make decisions with.
Now run it with your own numbers. If your costs come out higher than what your mechanics produce, every hour on the stand loses money. Every free wheel true and every tire change that never made it onto a ticket pushes that 75% lower.
"But my people do everything"
Most specialty shops will say this doesn't work for them. The same person sells bikes, writes up service and turns wrenches.
It still works. Split their wages by where their time goes. Someone who spends 60% of the week on service gets 60% of their wages charged to service. It's the same rule you used for rent and utilities.
Your tools won't do it for you, either. Most POS reports are built around margin on bikes and parts, not on what a labor hour produces. That number has to be built on purpose.
There's a harder question here too. We tend to feel good when one job description covers tech work, sales and service writing. It feels efficient. It may also be what keeps a shop where it is. Every time a tech leaves the stand to sell a tube, a $95 hour turns into a $6 sale. Small shops can't always have a dedicated tech, but they can protect blocks of tech time and schedule around them. That decision is harder than it sounds, and it's where scaling starts.
The rule is simple: the service department gets graded on its own. It has its own profit and loss statement (P&L), reviewed monthly if you can and at least once a year. If service is losing money, bike sales covering for it isn't a strategy.
Everyone has a part
This isn't one owner's problem. The whole industry taught us that service is a courtesy. POS systems report margin instead of labor. "Throw in a quick true" became normal. Shops copied each other's labor rates instead of working out their own.
Fixing it takes everyone in the building:
Owners build the system: the service P&L, a labor rate based on costs, a pay plan and a path. Mechanics can't do that part, so it starts here.
Service writers own the customer conversation. They diagnose with the customer, sell the service, price it and put every job on the ticket before it reaches the stand. If it isn't written down, it doesn't get done, and it doesn't get done for free.
Mechanics complete what's on the ticket, the same way every time. If they find something else, it goes back to the service writer, who takes it to the customer. Mechanics know what they're worth, and consistency is what makes their work measurable. Measurable work is what gets paid.
When mechanics know their worth and the shop has a system that pays them for it, both sides want the same thing.
What the thriving shops do
Some shops have figured this out, and they're doing well. They don't have more mechanics. They know their numbers, and their people know what's expected.
From a high level, they share a few habits:
The service department has its own P&L. Service revenue and costs are tracked separately and reviewed on a schedule.
The labor rate comes from costs, not from the shop down the street. They price from their break-even number up.
Every mechanic knows their target. It's posted somewhere and talked about every week. It isn't a secret.
The process is written down and runs the same way every time. Check-in, estimate, customer approval, repair, quality check, pickup. A new hire can learn it in a week because it's measurable, repeatable and teachable.
Nothing gets done that isn't on the ticket. The service writer sells and captures everything up front. The mechanic completes the ticket and sends anything new back to the writer.
Tech time is protected. It's scheduled in blocks, not squeezed in between customers on the sales floor.
Pay rewards output and quality together. Incentive pay is tied to completed ticket hours and comeback rate, so speed alone doesn't pay.
There's a visible path. Technician levels have clear criteria, and pay rises at each level. People stay when they can see where they're going.
None of this needs a European framework or a manufacturer program. It needs the whole shop to treat service as a business, and ownership to build the system that makes that possible.
Agreeing, and also
ECI is right that the trade needs clear training paths and a shared definition of competence. And also, a well-trained mechanic placed in a service department with no numbers and no process will still leave.
Wilkins is right that mechanics should be paid properly for their time. And also, a shop can only pay well if it knows what each hour is worth and charges for it.
What if the next standard the industry writes isn't only for the mechanic, but for the service department the mechanic works in?
One thing this week
Pull your last 12 months of service labor revenue, labor only with no parts.
Then add up what the service department costs: payroll, its share of rent for shop and storage space, its share of utilities and other shared costs, plus tools and supplies.
Subtract the costs from the revenue.
How close are you?
If this feels like a lot
It is. Pulling service apart from the rest of the shop, splitting shared costs and setting a rate you can stand behind takes real work. Most of us were never shown how.
I've worked through it in my own shops and with other owners. I don't know your numbers. You do. What I can do is guide you through the process so you're not figuring it out alone, and we'll tackle it together.
If you want help, schedule a time to talk.
I know how hard it is to own a bike store. I want to share what I learned from 30 years working in the bike industry.
Bring whatever numbers you have.